If the battery voltage drops, less current flows, and eventually there is not enough to make the components work. The extent to which a wire resists the flow of current is called resistance, and is measured in ohms.
Printed circuits are plastic sheets on which copper tracks have been printed. Components are plugged directly into the tracks. A few modern cars have flexible printed circuits. The copper tracks are printed in ribbons of flexible plastic, which replace the whole wiring system.
Electricity flows from a battery in one direction only, and some components work only if the flow through them is in the correct direction. This acceptance of a one-way flow is called polarity. On most cars the negative () battery terminal is earthed and the positive (+) one feeds the electrical system.
There are many fuses, each protecting a small group of components, so that one blown fuse does not shut down the whole system. Many of the fuses are grouped together in a fuse box, but there may also be line fuses in the wiring.