Wiring diagrams happen to be a perfect vehicle for carrying the principles of technicians beyond nuts & bolts. First, the simple act of color-coding helps to bring out the true wealth of your knowledge and is an excellent step in diagram analysis. Beyond that, it is an amazing tool for developing the awareness needed to get on the road to becoming an expert learner.
You will need to use the ohmmeter as an ohmeter and not as a continuity checker for the next step in the procedure. You will want to use the lowest ohm scale your meter offers, as the typical winding resistance in motors such as these is less than 100 ohms. If the motor is a permanent split-capacitor motor, you are going to be looking for common and speed taps of the winding.
Do not coil excess cable of different types (i.e. motor power and feedback) together. An efficient transformer is formed at HF. Cable lengths should ideally be trimmed to fit the application. If excess cable cannot be trimmed, it should be laid in an ‘S’ or figure eight pattern.
If the coil of wire could carry on moving like this, it would rotate continuously—and we did be well on the way to making an electric motor. But that ca not happen with our present setup: the wires will quickly tangle up. Not only that, but if the coil could rotate far enough, something else would happen. Once the coil reached the vertical position, it would flip over, so the electric current would be flowing through it the opposite way. Now the forces on each side of the coil would reverse. Instead of rotating continuously in the same direction, it would move back in the direction it had just come! Imagine an electric train with a motor like this: it would keep shuffling back and forward on the spot without ever actually going anywhere.