The side and tail lights, however, which you may need to leave on when the car is parked, are always wired independently of the ignition switch. When fitting extra accessories, such as a rear window heater which consumes a heavy current, always wire it through the ignition switch.
This means it must be connected using wires thick enough to carry 4 amps comfortably. Often the power consumption of a component will be stated in watts, which are found by multiplying amps and volts. The lamp in the example consumes 48 watts.
The sudden surge of high current in a short circuit makes the fuse wire melt, or blow, breaking the circuit. When this happens, see if there is a short circuit or a disconnection, then install a new fuse of the correct amperage rating (See Checking and replacing fuses).
The fuses are usually grouped in a box or on a panel with a cover. Ideally, the box should be fixed in an accessible place — such as the bulkhead under the bonnet.