All the electrical units of measurement are interrelated: a pressure of 1 volt causes a current of 1 amp to flow through a resistance of 1 ohm. Volts divided by ohms equal amps. For example, a light bulb with a resistance of 3 ohms, in a 12 volt system, consumes 4 amps.
The starter motor has its own heavy cable, direct from the battery. The ignition circuit furnishes the high-tension impulses to the sparkplugs; and the charging system includes the generator, which recharges the battery. All the other circuits are called ancillary (subsidiary) circuits.
The current would encounter the resistance twice, and the double resistance would halve the current, so that the bulbs would glow only feebly. Connecting the bulbs in parallel means that electricity goes through each bulb only once.
The other, probably rated at about 20-30 amps, protects components not wired through the ignition — horns, interior lights and the cigarette lighter. Where a single fuse protects a number of circuits and keeps blowing, each circuit must be checked individually to discover which one is faulty.