The side and tail lights, however, which you may need to leave on when the car is parked, are always wired independently of the ignition switch. When fitting extra accessories, such as a rear window heater which consumes a heavy current, always wire it through the ignition switch.
Depending on the fuse design, it is sometimes possible to tell whether it has blown by holding it up against a light; a break in the wire inside may be visible. Another clue is blackening of the glass cover. If there is no visible sign, check by fitting another fuse of the same rating; if that cures the trouble, then the fuse was to blame.
Modern cars often need room for many wires in confined spaces. Some manufacturers now use printed circuits instead of bundles of wires, particularly at the rear of the instrument panel.
All the electrical units of measurement are interrelated: a pressure of 1 volt causes a current of 1 amp to flow through a resistance of 1 ohm. Volts divided by ohms equal amps. For example, a light bulb with a resistance of 3 ohms, in a 12 volt system, consumes 4 amps.