As a technician, I naturally look at things from a nuts & bolts perspective. As technicians, we understand objects and assemblies. We understand how things come apart and go back together. Is not this what Einstein and Ohm did? They figured out how "it" comes apart, which led to the ability of others to put "it" back together.
Suppose you take a length of ordinary wire, make it into a big loop, and lay it between the poles of a powerful, permanent horseshoe magnet. Now if you connect the two ends of the wire to a battery, the wire will jump up briefly. It is amazing when you see this for the first time. It is just like magic! But there is a perfectly scientific explanation. When an electric current starts to creep along a wire, it creates a magnetic field all around it.
The shield strongly attenuates the electric field noise. Core to shield capacitance is added to the stray capacitance, increasing ground currents in the loop. These currents generate a magnetic field. It is important to minimize the area of this loop as far as possible by routing the cable close to grounded metalwork.
In simple DC and universal motors, the rotor spins inside the stator. The rotor is a coil connected to the electric power supply and the stator is a permanent magnet or electromagnet. Large AC motors (used in things like factory machines) work in a slightly different way: they pass alternating current through opposing pairs of magnets to create a rotating magnetic field, which "induces" (creates) a magnetic field in the motor rotor, causing it to spin around. You can read more about this in our article on AC induction motors. If you take one of these induction motors and "unwrap" it, so the stator is effectively laid out into a long continuous track, the rotor can roll along it in a straight line. This ingenious design is known as a linear motor, and you will find it in such things as factory machines and floating "maglev" (magnetic levitation) railroads.