Another interesting design is the brushless DC (BLDC) motor. The stator and rotor effectively swap over, with multiple iron coils static at the center and the permanent magnet rotating around them, and the commutator and brushes are replaced by an electronic circuit. You can read more in our main article on hub motors. Stepper motors, which turn around through precisely controlled angles, are a variation of brushless DC motors.
The first thing you will need to discover is whether you are dealing with a three-phase motor. You may already know this from the application, but another giveaway is that the lead wires of most three-phase motors are single colors, not multiple colors, and usually identified with numbers. If, on the other hand, the motor diameter is less than seven inches and has a terminal board, it is most likely a single-phase motor.
In our experience, we disassemble, repair and reassemble objects we can see and touch. Our goal is a repair. However, to repair today vehicles, we must expand our understanding beyond things we can touch, see and use wrenches on. We must apply the technician approach to learning, information gathering and analysis.
Motor cables are defined as long when the motor frame is not bonded close enough to the drive panel to be considered a single ground plane. To be considered a single ground plane, the parts must be connected by a surface which is no longer than ten times its width.