The sudden surge of high current in a short circuit makes the fuse wire melt, or blow, breaking the circuit. When this happens, see if there is a short circuit or a disconnection, then install a new fuse of the correct amperage rating (See Checking and replacing fuses).
Electricity flows from a battery in one direction only, and some components work only if the flow through them is in the correct direction. This acceptance of a one-way flow is called polarity. On most cars the negative () battery terminal is earthed and the positive (+) one feeds the electrical system.
The other, probably rated at about 20-30 amps, protects components not wired through the ignition — horns, interior lights and the cigarette lighter. Where a single fuse protects a number of circuits and keeps blowing, each circuit must be checked individually to discover which one is faulty.
The strength of the current is measured in amperes (amps); the pressure that drives it round the circuit is called voltage (volts). Modern cars have a 12 volt battery. Its capacity is measured in amp/hours. A 56 amp/hour battery should be able to deliver a current of 1 amp for 56 hours, or 2 amps for 28 hours.